CRAZY PIERROT SAUNA TENT Crazy Pierrot sauna tent set

CRAZY PIERROT

For campers and sauna lovers, we have created a sauna tent that is simply hot, with meticulous attention to detail, to provide a high-quality experience that can only be found in nature.

1. Purely Japanese-made stove This wood stove is made in Tsubame-Sanjo, Niigata Prefecture, a major production area for metalworking products. It was carefully crafted by a long-established metalworking manufacturer. Please enjoy the quality of Japanese-made products to the fullest.
2. The tent is made of extra-thick quilted fabric. In addition, it has three fresh air intakes, allowing it to take in as much oxygen as possible.

Click here for a list of CRAZY PIERROT products

CRAZY PIERROT SAUNA TENT Crazy Pierrot sauna tent set

This hot tent sauna created by CRAZY PIERROT allows you to experience a sense of unity with nature. This product allows you to escape from your busy daily life and enjoy a luxurious moment.

The sauna tent can be heated up to 140°C, but we recommend using it at 110°C as it is too hot to enter. By applying high heat, you can effectively warm up your body and promote relaxation of the mind and body.

This tent has a portable and compact design that can be used outdoors, at the campsite or in the garden. The silicone helium valve makes it easy to assemble. Its size of 160cm x 160cm x 220cm provides a spacious space for you to spend a comfortable time with your family and friends.

In addition, using a sauna is also effective in improving immunity and metabolism, and relieving stress. It relieves daily fatigue and supports the detoxification of the body. After using the sauna, you will feel refreshed and invigorated, and your energy will increase the next day.

Sauna tents should be handled with care. They can cause fires and burns, so please take adequate fire protection measures. Care should be taken when using them in humid environments. Also, be sure to clean them thoroughly after use and dry them before storing them.

Enjoy a relaxing time with the CRAZY PIERROT Sauna Tent Set, which allows you to feel one with the fascinating nature. It is on sale now at a special price, so be sure to buy it soon.

Product Features

01. High-power wood stove with secondary combustion structure Secondary combustion refers to sending air into the combustible gas that did not burn completely in the primary combustion, causing it to burn again. This wood stove has a structure that induces secondary combustion in two places inside the body. In other words, we aim for tertiary combustion. We believe that by burning the fuel completely, we can maximize the heat generated from the same mass of fuel, thereby achieving high heat output. Please take a look at the nearly transparent smoke coming out of the chimney.

02. Double-walled structure and weight for high temperatures Heat is energy that moves from high to low temperatures. The larger the surface area of ​​the stove body and chimney that are in contact with the air, the more heat is transferred at the same time, and the higher the temperature in the room becomes. In order to achieve high temperatures, the stove has a double walled structure and is large.

03. Sturdy structure for loyly Loyly is an essential part of a sauna. The groaning of the stones after the aromatic water is gently poured in, and the heat pouring down on you is an irresistible ecstasy. However, wood stoves, by their very nature, are not a good match for loyly. They also do not go well with high heat. Due to the nature of stainless steel, the stove inevitably becomes distorted. I was reluctant to give up on loyly or high heat, so I put a core through the top plate, prepared for it to become heavy.

Specifications

PRODUCT ID: #7e0f4c27-209e-45aa-b657-da8e44c6d41c
Color: Black Assembly size (external dimensions): W220 x D220 x H180cm
Storage size: (approx.) W70 x D30 x H36cm
Weight: (approx.) 11kg (including accessories)
Capacity: 4 adults Material: Tent: PU1500mm Oxford cloth Frame: Aluminum alloy Minimum water resistance: PU1500mm
accessories:
Stove Tent 3.5m rope x 8 2.8m rope x 3 Pole x 2 19cm peg x 15 20cm luminous peg x 4 Carry bag for poles Carry bag for pegs and ropes Overall storage bag Country and region of manufacture: Japan, Niigata Prefecture, Tsubame City Dimensions (length x width x height) and weight

Notes

Please be sure to follow safety precautions.
This instruction manual contains important information to prevent injury to the user and other people and damage to property, and to ensure safe and correct use of the product. Please read the following information (indications and symbols) carefully before reading the main text and observe the instructions.

Prohibited acts

● When using the sauna, please do not use this wood stove with anything other than our sauna tent. As a general rule, when installing inside a tent, please only use it in sauna tents manufactured by our company for the purpose of running a simple sauna. Please do not use it for any other purpose, as a permanent installation, or inside any other room or tent. Installing a stove inside our tent to enjoy a sauna can be very dangerous, so please be sure to carefully read the "Sauna Usage Instructions and Things to Observe When Using" and follow all of the instructions before using.

Installation location/weather/installation method

● Please make sure in advance that the location where you will be installing the stove is suitable for use.

● Always use the stove outdoors.

● Do not use the stove on rainy, snowy or windy days, or when low pressure is predicted or such conditions are forecast.

● If the weather worsens, discontinue use immediately.

● As a general rule, please refrain from using the product at night.

● Install the stove in a location where it will not tilt and make sure the stove chimney is straight.

● Before lighting the stove, check that there is no damage to the stove, that the chimney is securely connected, and that the chimney connection is not loose. Damage or a loose chimney connection may lead to an unexpected accident. Please check thoroughly in advance.

● Before using the stove, remove any soot and dust from inside the chimney.

● Before starting, make sure there are no flammable objects near the stove.

● Do not place flammable liquids, batteries, highly flammable items, or items that are sensitive to heat near the stove.

● If there are flammable or melting objects near the stove, they may ignite and cause a fire. If there is a gas canister placed near the stove, the heat may increase the pressure inside the can, which may cause an explosion. Do not place flammable or explosive objects near the stove.

● Fallen leaves and grass under the stove may catch fire due to the radiant heat emitted from the unit. Do not use on flammable surfaces such as wooden decks, grass, fallen leaves, etc. If you are concerned about damage to the ground under the stove, be sure to lay a thick heat-resistant sheet or a non-flammable board in addition to the heat-resistant sheet provided. Be sure to fold the two heat-resistant sheets provided in half and lay them on the ground under the stove. Do not use the stove without laying them.

● Install the unit in a location where there are no flammable objects within 3m of the chimney outlet.

● Sparks emitted from the chimney may melt the tent or tarp. Make sure there are no flammable objects around the tent before starting.

● If the chimney height is not properly secured, the updraft may not be generated and the smoke may backflow. Be sure to use the chimney at a length that ensures all the chimney parts are firmly connected.

● Do not allow children to use this product alone. If children are using this product, they must be supervised by an adult at all times.

● Always wear gloves when assembling the product to avoid injury.

● When handling the main unit, please wear gloves (such as flame-retardant gloves) and use tongs, etc. There is a risk of injury or burns.

● Please check in advance whether there is a fire extinguishing facility near the installation site. If there is no fire extinguishing facility, please keep at least 2 liters of water in a bucket ready at all times.

Be careful of burns and fires

● The stove itself becomes extremely hot, so if the chimney sticking out from the tent is too close to or touching the tent fabric, it may catch fire. Please use it at a certain distance.

● If the touch prevention equipment is not properly installed, a fire may also break out from there. When the stove is in use, the combustion chamber and chimney become very hot. Be careful not to touch them by mistake.

● Do not go to bed with the stove lit and still burning.

● Do not use this product to dry clothes, etc.

● Please check in advance whether there is a fire extinguishing facility near the installation site. If there is no fire extinguishing facility, please prepare a bucket with at least 2 liters of water at all times.

Burning, burning and flame adjustment

● Do not use softwood firewood. Never use anything other than well-dried hardwood firewood.

● Do not use gas or flammable materials to light stove.

● When lighting a fire, prepare hardwood firewood and place thin pieces in the stove to light it. Once ignited, immediately close the stove door and lock it securely.

● When lighting the stove, lighting the stove, adding more firewood, opening and closing the stove, or putting the stove away, always wear heat-resistant gloves to prevent burns when touching the stove.

● Always keep the stove door closed when using the stove. If you need to open the door to add firewood, try to keep the time open as short as possible. Leaving the door open for a long period of time may allow carbon monoxide and smoke to flow back into the stove.

● After lighting a fire or adding new firewood, while black or white smoke is coming out of the wood stove chimney, be careful of carbon monoxide and smoke backflow.

● If the stove's combustion weakens or a large amount of firewood is added at once and smoke backflow occurs, be careful of carbon monoxide and smoke backflow.

● Do not put too much firewood in the stove or put in a large amount of firewood at once. This will cause incomplete combustion, resulting in the production of carbon monoxide and backflow of smoke. The appropriate amount is about half the stove combustion chamber, but please adjust as necessary.

● When the stove warms up, an updraft is created by the chimney effect, but as smoke is likely to backflow immediately after lighting, be careful of carbon monoxide and smoke backflow until the fire is fully lit. After lighting the stove, check the inside of the stove periodically.

● As a general rule, keep the stove's air inlet fully open. Always keep the stove's air inlet fully open from immediately after lighting the fire until the firewood is burning properly. Closing the air inlet can easily result in incomplete combustion, especially when there is firewood that is not burning. Please be careful.

● When using the wood stove for the first time, perform a trial burn (empty burn) for about an hour until there is no smell or smoke coming out without placing sauna stones or other items on the stove top. Because the paint has not been completely baked, there will be a smell and smoke coming out of the stove surface. In that case, be sure to perform the trial burn (empty burn) outdoors, and not in a sauna tent.

● Packing the stove with too much firewood can restrict airflow, causing smoke to back up and incomplete combustion (carbon monoxide production). To prevent incomplete combustion, be sure to check the inside of the stove every 10 to 15 minutes.

● If the stove glows red temporarily during combustion, this is a sign of excessive combustion caused by adding too much fuel or air. Even if the fuel and air are adjusted correctly, the stove surface may glow red in parts and temporarily. In most cases, this will go out after a short time, but if it continues to glow red or the chimney becomes red, this is a sign of excessive combustion. Do not add any more firewood.

● The stove becomes very hot and takes time to cool down. When putting away, leave it for at least 2-3 hours and make sure it has cooled down sufficiently before putting it away.

● Never dispose of ash remaining in the stove into nature. It will not decompose and will lead to environmental damage. Dispose of it in accordance with the regulations of the place where the stove was used.

maintenance

● When packing up, be sure to wait until the stove and sauna stones have cooled down sufficiently. The stove and sauna stones become very hot and take time to cool down. When packing up, leave them for at least 2-3 hours and make sure they have cooled down sufficiently before packing up.

● When assembling or disassembling, always wear gloves.

● Use a brush to remove soot from the chimney and inside the stove.

● When washing with water, use a soft sponge and be sure to dry thoroughly after cleaning.

● Do not use metal abrasives, sandpaper or paper.

● If the chimney is difficult to remove after use, apply oil spray to the gap after the chimney has cooled, and wipe it thoroughly after removing it. "Anti-seize heat-resistant lubricant" may be used to make the chimney easier to remove, but it may catch fire. This is extremely dangerous, so never use it.

● The tabletop will definitely warp. Some parts will definitely float, but this will not affect the use of the product. Thank you for your understanding.

● After use, the color will change due to heat. It will not return to its original state. The printed part will also change color due to heat. It will not return to its original state. Thank you for your understanding.

● In some cases, "anti-seize heat-resistant lubricant" is used on the chimney joints to make it easier to remove the chimney, but repeated use may result in fire, so please refrain from using this product.

● When using for the first time, perform a trial burn (empty burn) outdoors for about an hour until no odor or smoke is produced.